crimp tools manual hydraulic type

As a specialized service we provide the responsiveness and expertise that focusing on just a single entity can give. This premise permits us to present very competitive or better than pricing, most expedient turn around time, exceptional client interface, specialized work schedules, and superior expertise in calibration, repair, adjustment and tool compliance. Our belief is that crimpers and associated tools are just as important to the installer as a micrometer or caliper is to the machinist. At MC TELSERV, INC. these tools are not seen as just additions to an existing service. They are the only reason for our existence.

MC TELSERV, INC. has authored calibration procedures and work instructions for the specific maintenance, service and calibration of crimp and associated tools. Our accreditation for technical competence in this field of calibration is verified by Certificate No: 11034 and accredited by our registrar NQA laboratory Services. We certify the accuracy, repeatability and traceability of all calibrations.

crimp tools manual hydraulic type The client is the center of our universe, and unto this premise we mandate our services to be quality assured, cost effective, professional and client responsive. MC TELSERV, INC. also meets or exceeds the requirements of TL-9000.

Our scope of calibration in accordance with our accreditation to ISO/IEC 17025 covers calibration of dimensional measuring equipment such as Micrometers, Calipers, Indicators, Plain Plug Gages, Pins, Dial Bore Gages, Depth Micrometers, Thread Plug Gages, Height Stands, Setting Discs, Length Standards, Ball Gages, Micrometer Standards, Low Torque Devices, Force Gages, Gage Blocks and many other precision and super-precision tools and gauges. Along with our accreditation our personnel possess the skills, training, expertise and professionalism required not only to expertly calibrate, adjust and repair tools and gauges, but to provide information to help each client with their particular needs. Performing the calibration is only part of our job. We will be your calibration consultant, or engineer to advise and provide direction to help maintain a quality compliant, cost effective calibration program.

We maintain complete systemic conformity by use of written calibration procedures, traceability of standards and equipment, traceability of reference materials, long form data reports, empirical & historical data retention, labeling and certification of each tool, traceability of measured results and parameters tested.

Our quality and client responsiveness is second to none; our turnaround of items after receipt at the laboratory is a maximum of 3 days.

We know our mechanical calibration service will meet or exceed all of your expectations and more than adequately fulfill all of your calibration needs. Let us show you how we can and will meet those expectations.

crimp tools manual hydraulic type Calibration System and procedures accredited to ISO/IEC-17025, and compliant to TL-9000, ISO-9000 and QS-9000 calibration requirements. The only calibration service specifically accredited with its scope of calibration specifically for crimpers and associated tools for the Telecommunications and Broadcast industries. Registrar: NQA (Laboratory Services) Accreditation # 11034 Quality Control MC TELSERV, INC. maintains a four tiered calibration quality system for complete specification compliance and client confidence. MC TELSERV, INC. provides each client with empirical and historical data retention, with recall provisions and complete systemic compliance Traceable evidence for systemic, standards and equipment compliance. Certificate of Calibration Customer Service Unique calibration programs can be developed and implemented i/a/w the individual client's needs. Expedient turnaround of calibrated items is maintained to provide minimal out of service time, with no additional Item Expedite charge. Repair, replacement and/or purchase of new tools provided as required Calibrated data may be item formatted on disc for ease of use from any PC or laptop. No special calibration software required. Turn around of work after receipt at our laboratory- immediate to 3 days maximum. On-site or over the weekend work scheduling is provided to suit the client's needs. Tool & Equipment Sales Call us about our full line of tools and equipment. We assure you that your tool concerns will be handled in a most courteous, expert and professional manner, plus we offer the best prices with immediate delivery and calibration prior to receipt. Call our tool sales service at 1-484-875-9060 and ask for Larry.

Q- What is Calibration? A- Calibration is the act of direct or comparison measurement to insure the specified value of a measured parameter.

Q- What is direct measurement?
A- Direct measurement is measuring any parameter/or (s) of the device under test with an instrument that provides an actual numerical value for the measurement taken.

Q- What is comparison measurement?
A- Comparison measurement is using an instrument or gage of a known value to compare it physically, mechanically, electronically or digitally against a specified parameter of the device under test.

Q- What is the ISO/IEC 17025 specification?
A- It is the international specification that sets forth the requirements which must be met to insure the competence of testing and calibration laboratories.

Q- What is Accreditation to the specification?
A- Accreditation is the ultimate goal sought after by each laboratory. Accredited means that the quality calibration system has been audited by a registrar and found compliant with the elements of the specification, thus assuring client confidence through accuracy of measurements, traceability of standards, measurements and documents, and consistency of the total calibration service.

Q- What does this Accreditation do for me.
A- It assures each client that the laboratory providing the service has the proper resources to do the work, knows the uncertainty value of each measurement, uses traceable standards and equipment, has written calibration procedures and work instructions for each item, maintains recall for subsequent calibration, provides labeling of each item for traceability, maintains empirical and historical data for each tool or gauge, maintains resource and educational materials, and provides each client with an individual item calibration data certificate. It also reduces the cost of client supplier audit surveillance due to the fact that the registrar schedules periodic audits of each certificate holder to insure long-term compliance.

Q- How do I know if the laboratory is accredited or registered
A- An accredited laboratory will be very pleased to provide each client with a copy of the actual signed certificate of accreditation with the accreditation number and the laboratory's scope of calibration as assigned by the registrar.

Q- What is the difference between Accredited and Registered?
A- You may only use the term registered if you are actually registered to the provisions as set forth in the ISO-9000 series. Accreditation is the term used for acceptance to a specific portion of the ISO-9000 regulation. Calibration services are a specific portion of the entire ISO specification. These activities are regulated through compliance to the IS0/IEC 17025 specification. If the laboratory meets the requirements of ISO/IEC 17025 then it is also compliant to ISO-9000 and QS-9000 calibration requirements.

Q- Why do I need calibration?
A- To insure the conformity of the tool or gauge to produce the proper end results. Use of tools changes preload pressures as designed, improper handling or care can cause tool inaccuracies, hydraulic pressures will change with use, dies will eventually wear or may be misaligned. General maintenance and calibration is necessary to help preclude product liability and provide confidence that the tool will perform properly on a daily basis.

Q- What Tools need to be calibrated?
A- Precision, non- precision or super-precision measuring tools and gauges, all types of mechanical hand crimp tools, hydraulic crimp tools pump or battery operated, dies, hydraulic pumps, plug gages, pin locator gages, DMM'S, torque wrenches etc.

Q- What is frequency of calibration?
A- The frequency of calibration is the time period between calibrations. Frequency or cycle of calibration is usually determined by use, abrasive atmospheres, wear, type of instrument or gage, accuracy of tool or gage, handling, environment and other conditions that could cause inaccuracy in measurement or performance. General rule of thumb is a frequency of one year is initially established and then as indicated by the calibrated data the frequency may be lengthened or shortened in order to provide the necessary performance protection. pressure gages
crimp tools by phoenix contact
dimensional measuring equipment
precision and super-precision tools
crimp tools by trompeter
crimp tools manual hydraulic type
tl-9000 calibration compliant
continuity meters
crimp tools by burndy
plain plug gages
dial bore gages
depth micrometers
torque device calibration
crimp tools top loading ratchet type
tools and gauges
accredited laboratory calibration services
setting discs
crimp tools modular plug termination type
crimp tools full cycle ratchet type
micrometer standards
low torque devices
crimp tools pin & socket type
calipers
plain pins & plugs
coax bnc crimp kits
iso accredited
pressure gauges
crimp tools stakon terminal type
crimp tools ratchet compression type
tool calibrations
ball gages
various precision measuring tools
dies for large crimpers
crimp tools center pin indentor type
crimp tools by milestek
micrometers
calibration service for telecom
force gages
precision measuring tool calibration
crimp tools barrel type
crimp tools by amp
crimp tools battery hydraulic type
height stands
compression crimp tools
pin height gages
crimp tools by paladin
hydraulic crimp tools
tool calibration
isoiec 17025 accredited service
calibration and measurement services
clamp on meters
crimp tools open barrel d-sub type
crimp tools connecter type
electric hydraulic pumps
crimp tools by buchanan
crimp tools by newhall pacific
thread plug gages
crimp tools by molex
multimeters
machine tool calibration
thread plugs
crimp tools by thomas & betts
crimp tools by sargent
precision mechanical measuring tools
crimp tools ratcheting type
crimp tools by ideal
crimp tools color keyed multi-die compression type
length standards
crimp tools by packard
crimp tools by huskie
telecom tool calibration and maintenance
crimp tools rj-11 rj-45 type
crimp tools by cablematic
indicators
battery hydraulic pumps
meters & screwdrivers
crimp tools open barrel ratcheting type
gage blocks
coax cable stripper heads
torque wrenches
crimp tools coax cable type